Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication Williamsburg Metal - Metal Stamping, Deep Drawn, Metal Spinning, Metal Forming, Custom Metal Fabrication

Posts Tagged ‘flanging’

The Importance of Providing JIT – Just in Time Delivery

Sunday, July 3rd, 2011

The Importance of Providing JIT – Just in Time Delivery

Inventory is very important for many businesses these days. This is so because it can make or break the marketing strategies that are entailed on keeping inventory. As much as possible, adequacy is looked into by customers because having the lack of the goods and materials that they need is unpleasant. Likewise, customers who cannot meet their very requirements or specifications through the service provider they trust have the tendency of losing the loyalty on that service provider.

Being out of stock is something being avoided by companies in order to keep the business moving. The biggest fear of any business owner is having his business shut down. In order to avoid this scenario, companies these days make it a point to keep their services intact. For companies that provide products, they also make sure that what they have are more than enough for the consumers.

But then again, keeping too much is costly. When it comes to companies that tender both services and products to the market, having so many inventory at one point of time is expensive. This is the very reason why suppliers necessitate the cooperation of the consumers in terms of controlling the situation. There is no rush about this necessity because one strategy is applied by most companies who want to avoid complications. On the part of the service and product provider, the concept of Just in Time delivery is executed to steer away from the domino effect entailed on stocking unscathed materials and products. By means of Just in Time delivery, the product needed by the clients is given just before it is needed.

For Just in Time delivery to be executed properly, there is a great need for cooperation between the service provider and the client. Without constant communication on what must be done and what must be avoided, everything will simply fall to pieces. It has to be noted that a clear agreement about everything that matters within the deal is a very important factor to consider. Not only will this eventuate to satisfaction on both parties, the relationship between the seller and the buyer will also be strengthened.

Just in Time delivery is a strategy of Williamsburg Metal that is considered as a very strong advantage of the company. Apart from that, it is also a way of Williamsburg Metal on showing how professional it works for the best interest of its customers. In order to keep their customers loyal and for more people to be paying attention on how the services are done, Just in Time delivery is implemented will full strictness.

For any metalworking concerns, Williamsburg Metal provides what the client needs. Coupled with the great help of providing Just in Time delivery, the relationship between many clients and Williamsburg Metal is more than how it looks like. As time goes by, it is proven that more strategies are carried out by Williamsburg Metal because it believes that a good relationship between the company and the people being provided for by the company is indispensible.

Metal Fabricating: The Revolutionary Past to Present

Monday, January 3rd, 2011

Metal Fabricating: The Revolutionary Past to Present

Fabrication refers to the manipulation of a raw material in order to come up with something else. In all likelihood, the most functional fabrication is metal fabrication especially dating back since the ancient times. It is believed by many scholars that metal was discovered right before people learned how to write. This is why weapons and tools were prominent at some point during the old days. Not only were early people practical on the use of metals as tools, they were also aware of appreciating beauty. They were used to metal fabricating to the extent that metal tools were first created out of raw copper which they found on the surface of the Earth and hammered into useful shapes that set off with aesthetics.

Ever since the discovery of metals as weapons and tools, metal fabricating was revolutionized in as far as coming up with metal forming, metal bending, welding, and other operations of metalworking. The expansion of metal fabricating carries on to the present time when there are several providers of metalworking services such as metal stamping and metal spinning at the side of metal fabricating.

As we can clearly see it, there is a big difference between the purposes of metal fabricating during the tool age and during these days. Metals were used by primitive people in order to defend themselves. They used metals in order to create weapons such as spears and arrows. Survival is their main intention when it comes to metal fabricating. On the other hand, metal fabricating nowadays is for decorative purposes for the most part. Even though metal can still be used today for the creation of weapons and tools, tool age people were not into metal fabricating to make ornaments.

Metal fabrication services are truly benefiting a lot of industries up till now. Not only is metal fabricating used to decorate fixtures and equipments, it is also used in order to create different products that are useful in our everyday life. The ground-breaking success of the metal fabricating industry paved way to the spreading out of more operations that relate to metalworking.

When metal fabricating is the topic, Williamsburg Metal is not lagging behind the discussion. Williamsburg Metal carries out the quality service of custom metal fabrication. Only the finest metals are used in order to create high quality parts and components for the products that clients want to have. The practice of Williamsburg Metal on providing the best products at the most affordable prices without even losing an ounce of quality remains to be what many clients go after.

Williamsburg Metal is the perfect choice when it comes to metal stamping, metal spinning, and custom metal fabricating. If there is something that you want to create out of the metal you prefer, you can have it just by having a quote from Williamsburg Metal. Hassle is surely out of the way because Williamsburg Metal is up for something greater and bigger whenever a client wants something done on time and with excellence.

The Rigid Procedures Involving Metal Fabricating

Monday, December 20th, 2010

The Rigid Procedures Involving Metal Fabricating

Metal fabricating is a term that refers to the construction of machines, building of structures and any other similar equipment by means of assembling, cutting, and shaping parts out of raw materials. It is a process that can overlap with many other processes involving the assembly of machines and structures out of different raw materials.

There are different raw materials that can be used for metal fabricating. The most common of these raw materials are castings, expanded metal, fittings, formed metal, plate metal, hardware, and welding wire.

In order to start the process of metal fabricating, the raw material, as desired by the client, needs to be cut to a particular size. There is a wide array of tools that may be used for this stage. One of the most typical ways of cutting raw materials is by the use of shearing which can also be termed as die cutting. Shearing is a process of metalworking in which the stock is cut without the development of chips. This means that there is no melting or burning involved. Technically speaking, shearing defines the process of cutting a raw material with straight blades. Those materials that are in the shape of plates or sheet metal are the most usually sheared raw materials. Apart from plates, rods can furthermore be sheared. Metal fabricating may also involve shearing-type operations which differ from shearing itself in that it utilizes curved cutting blades instead of straight blades.

Another way of cutting raw materials is by the use of special band saws. Basically, a band saw is a power tool that makes use of a blade that has a continuous band of metal characterized by teeth responsible on cutting different work pieces. The teeth of the band saw are located along its edge. The hardened blades of these special band saws complement with the intention of cutting even slashes by means of a feed mechanism.

If you are up to expert metal fabricating, Williamsburg Metal is the perfect answer to your need. With the experience of the people behind Williamsburg Metal, there is nothing to worry about anymore on having the premium metal fabricating that you need for your equipment or application.

The quality of metal fabricating is something that is taken care of by Williamsburg Metal because this is what clients highly regard with importance. Right from the sourcing of the raw materials that are essential for metal fabricating, right up to the selection of the shipping method, Williamsburg Metal assesses everything for the most favorable results. More to this are the inspections involved in every aspect of the metal fabrication as well as metal stamping and metal spinning. Custom metal fabrication is not a problem for Williamsburg Metal because this is one of its stressed out services. For each operational step, the approval of those who are spearheading the courses of action of Williamsburg Metal is indispensable. At the end of everything, products of highest quality are supplied to the clients in the aim of satisfying them.

The Evolving Process of Deep Draw Technique

Monday, November 22nd, 2010

The Evolving Process of Deep Draw Technique

Deep drawing is a process of forming sheet metal wherein a sheet metal stock known as blank is strained into a regular or irregular shape having more than the diameter of its depth. Around a plug, the metal blank is elongated and moved into a die which is any of various devices used for forming, cutting or stamping metals.

Different shapes are evident to the most typical products that use the deep draw method. Cylindrical products such as cups and cans make use of deep drawing. An example of a product with irregular shape is the enclosure cover of fire extinguisher. More than these, products that gain the benefit of deep draw technology range from small grommets to huge enclosed areas of different industries. Deep drawing is relied upon by aerospace industry, dairy industry, plastic industry, automobile industry, and lighting industry among many others. Operations that are particularly designed by engineers are necessitated by industries that assemble deep drawn parts.

While maintaining the material itself, deep drawing is a shape transforming technology that is widely accepted by many businesses. The technology is known as deep drawing because the depth of the part that is drawn surpasses the diameter of that part. This can be carried out by means of having the part undergo a series of dies. Because of the retentive characteristic of the material, the sheet metal that is located in the shoulder area of the die (specifically regarded as the flange region) endures different kinds of stress. Wrinkles in the flange region then become apparent due to the stresses. If you want to put a stop to the appearance of the wrinkles, a blank holder can be of great assistance.

There are actually two variations of deep draw technology. Apart from the conventional deep drawing, also classified is the unconventional deep drawing. The very focus of an unconventional deep drawing technique is different to that of conventional deep drawing in that it extends the limits of the process to be easily bent, shaped, or stamped. The processes that are classified as unconventional are growing in number rapidly these days.

As far as deep draw technology is concerned, Williamsburg Metal blows its own horn in its stock of metal stamping, metal forming, metal spinning, tool making and die making that specialize on the use of deep drawing. Above it all, the equipments used by Williamsburg Metal are all state of the art. Not only are the facilities neat enough for operations involving deep drawing, these are beyond the best in the business.

Williamsburg Metal takes pride in its use of deep draw metal stamping. It is also at its best on performing various secondary operations apart from metal stamping and metal spinning that it supplies to a roster of industries. True enough, the tradition of supplying this kind of service in the aim of producing only the finest and cost-efficient products is very well carried on after many decades of lending a helping hand to many individuals and firms.

What You Can Gain Out of Metal Spinning

Monday, November 8th, 2010

What You Can Gain Out of Metal Spinning

One good characteristic of metals is its ability to be transformed into several various shapes by means of different processes. A common process of altering the look of a metal is metal spinning. When it comes to metal spinning, a metal tube or a metal sheet is altered into a particular shape. This can be circular, conic, hemispherical, and cylindrical or any other shape desired. Most of the time, the process of metal spinning is cold-forming.

Many industries and applications make use of metal spinning due to its minimalistic approach with the operation. In order to cut cost of particular materials, metal spinning can be used to generate a cheaper part or product without sacrificing the worth. Some of the most common items that underwent metal spinning are gas cylinders, vases, and cookware among others.
An assortment of tools is employed by metal spinning. The most common and by and large the most fundamental tool is the spoon. In order to create varying results, other tools apart from spoon can be used. The tools used for metal spinning range from solid brass to aluminum. Depending on the result that you want to effect, the kind of tool must be chosen accordingly.

Williamsburg Metal delights itself with its capability on metal spinning as a metalworking process. Various industries and applications make use of the capability of Williamsburg Metal on metal spinning among other operations that supply its clients with only the finest metal parts of high quality. Different products and parts are provided in the marketplace with the consideration of quality control and user satisfaction. Apart from hand metal spinning, lever metal spinning is utilized for operation of more than 1,000 pieces. Blanks with diameter of up to 26 inches can be spun by Williamsburg Metal. On the other hand, diameter of up to 60 inches can be cut using circular shears. There are also utility lathes that come with rockers for secondary operations such as beading, rolling, and trimming.

The design and engineering of the products of Williamsburg Metal are regarded with high importance for the sake of the clients and the trust being given to the metal spinning company. For the best development of parts and products, consulting of design and engineering is done. Furthermore, the production of the components and parts are united with process design, setup, and application.

There are two shearing machines utilized by Williamsburg Metal when it comes to shearing sheet metal forming and metal stamping blanks. Both have the capability of shearing up to 1/8 inch of thickness. On the other hand, there is a maximum of 48 inches of diameter for the circular shearing.

Metal spinning is very popular to many industries because of its efficiency with the cost. Not to mention, the result can be produces quicker compared to other types of operations. It boils down to your decision on what to choose depending on your taste and budget. Take note that there are other operations besides metal spinning but never forget the advantages that you can get out of this cost efficient operation.

The Simple Process of Metal Spinning

Monday, October 18th, 2010

The Simple Process of Metal Spinning

Metal spinning is an essential process in metalworking by which a metal tube or a metal disc is spun at high speed in order to form into a part that regards symmetry around an axis. The symmetric property considered by metal spinning is axially symmetry. Spin forming can also refer to metal spinning. For simplicity, spinning can be used to indicate metal spinning as a metalworking process. There are two primary ways in order to perform metal spinning: either by hand or by means of a CNC lathe that is ultimately putting back the older lathes due to its easiness and convenience in operation and setting.

By and large, round metal parts are produced by means of metal spinning. Practically any kind of metal characterized by ductility can be used for metal spinning. Depending on the capability of the available equipment, the depth and the diameter of the formed parts differ. Most of the time, metal spinning is used in order to give accents to architectural designs. Details on different metal forms are also highlighted out of metal spinning. Lighting fixtures as well as decorations also utilize metal spinning for commercial applications.

A simply process is undergone by any metal that has to be spun. A form, also called mandrel, is escalated in the lathe’s drive section. By means of a pressure pad, a metal disk is pressed together against the form. The pressure pad used is clamped against the tailstock which is a sliding or a movable support for the center of a lathe. At high speeds, the form and the sheet metal is spun together. In order for the sheet metal to flow over the form, a force that is confined to a small area is tendered by way of different knobbed tools.

An associated operation is called hot spinning wherein the piece of metal is spun on a lathe coupled with metal heating by the use of high heat. Once the metal is heated, it is given its desired form while the tool present on the lathe gives the pressure against the surface that is heated. This goes to show that the shaping is done by means of distortion due to the hot spinning.

Williamsburg Metal performs metal spinning at its best. However, due to the low costs of tooling, metal spinning is comprehensively utilized manually for the production of one thousand pieces or less. Deep drawn forms are extensively used for the metal spinning of Williamsburg Metal. Most of the times, clients go to Williamsburg Metal in order to immediately prototype round hollow forms of metal. Metal spinning is performed by Williamsburg Metal by the use of applying a levered and even force to the metal. The force is homogeneously applied by means of spinning or rotating the metal with its anticipated mandrel or form at very high revolution per minute. The most important part is the production of spun metal that has no warble or wrinkle as the metal is being deformed due to metal spinning.

Metal Stamping and its Various Operations

Monday, September 13th, 2010

Metal Stamping and its Various Operations

Metal stamping is a very important factor of metalworking. It refers to different manufacturing procedures that involve forming of sheet-metal. Some of the most common varieties of metal stamping are blanking, bending, coining, embossing, flanging, and punching. The production of the desired form varies from an operation that is done solely to a series of stage operations. The desired form is produced from every hit of the press. Metal stamping is normally performed on sheet metal which is basically a metal formed into flat and thin piece. This material is one of the most basic forms that are utilized when it comes to metalworking because it can be bent and cut into various shapes. Apart from sheet metal, other materials can also be the cornerstone of metal stamping.

There are different operations that are linked to metal stamping. For one, bending is used for the production of U-shape, V-shape, or channel shape in materials that are ductile such as sheet metal. The most typical equipments that are used for the bending operation are brake presses, box and pan brakes, and other focused machine pressed.

Also operations of metal stamping are blanking and piercing. The two are often mistaken to be the same. Even if the procedures that are connected to both operations are alike, there is still something different between the two. When it comes to blanking, the shearing processes result to punching out of piece termed as “blank”. On the other hand, the result of the shearing processes for piercing is the piece known as “scrap”. Under the category of blanking and piercing are many other types including cutoff, dinking, lancing, nibbling, notching, perforating, and shaving.

Another metal stamping operation is coining. This is a form of stamping that is based on exactitude. The involved work piece is put under an amply high stress so that there will be a plastic flow right on the very surface. Various parts are manufactured by means of coining. Many industries use coining whenever there is a necessary high relief for the part or whenever very fine attributes for the part are needed. Good examples of products that underwent coining are medals and coins.

When it comes to high quality metal stamping, Williamsburg Metal specializes in deep draw metal stamping. The best thing about Williamsburg Metal is its being equipped on performing several secondary operations including slotting, spot welding, tapping, and trimming. Regardless of the kind of metal, Williamsburg Metal can tender excellent metal stamping. It remains to be the first choice of the electrical industry, the electronic industry, the giftware industry, the military industry, medical industry, scientific industry, and food service among others.

For 75 years, Williamsburg Metal has been taking note of the quality that it must provide to its clients as far as the resulting product out of the extensive raw materials used is concerned as well as the on the dot delivery. Reliability is what Williamsburg Metal wants to inculcate on the minds of its clients in order to maintain a long-term relationship.


Home     About Us     Contact     Links & Resources
Metal Stamping     Metal Spinning     Sheet Metal Forming     Custom Metal Fabrication     Facilities


263 Kent Ave., Brooklyn, NY 11211-4120, Tel: 888-535-5402 / 718-782-7040 Fax: 718-384-7424

Website Design by 123Triad Web Design